Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PL5500 internal SCSI controller ID change

Status
Not open for further replies.
ronfu

ronfu

IS-IT--Management
Jul 21, 2003
10
DE
I like to change the ID of the internal SCSI controller in a PL 5500 because I'll install a W2k cluster with drives attached to this controller. I couldn't find anything at the EISA configuration.

thank's

Ron
 
Sort by date Sort by votes
Go into the F10 and then hit the first choice, then system config. Then View and edit and view and edit details. Then arrow down to about 3rd of way down and you should see the SCSI and there you should be able to change the ID.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kiran Angara
  • Locked
  • Question
Hyper-V Internal Network Ping Issue On WS2019
Replies
0
Views
296
Kiran Angara
Kiran Angara
BULOS
  • Locked
  • Question
RECONFIGURATION DE RAID 5 POUR POSITIONNER LE DISQUE DUR SYSTEME DONT LA POSITION A ETE CHANGEE
Replies
0
Views
227
BULOS
BULOS
dd22pp
  • Locked
  • Question
HP G5 Server with P800 Controller Did't boot
Replies
0
Views
237
dd22pp
dd22pp
Alex L
  • Locked
  • Question
BGI rate has changed
Replies
0
Views
190
Alex L
Alex L
demas97
  • Locked
  • Question
Dell R715 RAID Controller / HBA
Replies
0
Views
189
demas97
demas97

Part and Inventory Search

Sponsor

Back
Top