Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pix firewall configuration - new user

Status
Not open for further replies.
destinyml

destinyml

ISP
Apr 27, 2004
27
DK
Hi

I have just purchased a PIX 515E firewall for use in a datacenter protecting several webservers and I need some help configuring it.

I have two networks:
81.19.251.80/28
81.19.251.128/25

I would like to have both networks behind the firewall on the same interface and I have a clear configuration. Nat needs to be disabled as I would like to have global IP's behind the firewall.

Can anyone help me with the configuration? I've tried working with this but I'm having dificulties making it work. Do I have to make any changes to gateway at the router on the outside and to the servers on the inside?

Any help you can give is appriciated.

Thank you
 
Status
Not open for further replies.

Similar threads

TheFireman2
  • Locked
  • Question
Help with Watchguard Firebox M200 setup as a TMG 2010 replacement with ASA 5515 as main firewall
Replies
1
Views
331
hairlessupportmonkey
hairlessupportmonkey
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
199
xwray
xwray
Shmid
  • Locked
  • Question
Restricting Sonicwall SSL-VPN users for WAN access
Replies
7
Views
995
Shmid
Shmid
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
254
brownmab53
brownmab53
hall5942
  • Locked
  • Question
open firewall port on 881
Replies
0
Views
228
hall5942
hall5942

Part and Inventory Search

Sponsor

Back
Top