Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PIX 525 - Restore factory defaults

Status
Not open for further replies.
bugskumar

bugskumar

Technical User
Joined
Jan 11, 2006
Messages
18
Location
US
How do I restore a PIX 525 to its factory default settings?

When I try using the known command for it, it says the command is not supported on PIX 525.

pixfirewall(config)# conf factory-default
'config factory-default' is not supported on PIX-525

Thanks
 
Sort by date Sort by votes
I think you apply that command in enable (pixfirewall#) mode don't you?
 
Upvote 0 Downvote
You coudl always delete the start up config. This will bring it back to the default.


wr erase
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

brownmab53
  • Locked
  • Question Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
321
brownmab53
brownmab53
xwray
  • Locked
  • Question Question
PIX 501 DHCP Server function
Replies
0
Views
265
xwray
xwray
quazimotto
  • Locked
  • Question Question
Correct Upgrade Path for PIX
Replies
7
Views
619
quazimotto
quazimotto
quazimotto
  • Locked
  • Question Question
Ping thru PIX to subnet inside??!!
Replies
0
Views
245
quazimotto
quazimotto
hall5942
  • Locked
  • Question Question
Site to Site VPN with Cisco 881 and PIX
Replies
0
Views
239
hall5942
hall5942

Part and Inventory Search

Sponsor

Back
Top