I'm running a PIX 506 6.3(3). I have the VPN cranked up and working mostly fine. I have defined an ip local pool for my address-pool in the vpngroup. The issue I'm having is that we are using Cisco Softphone and the IP address on the VPN is different almost everytime somebody starts the VPN. That means changing a setting in the Softphone so the audio works correctly. I was looking to increase the "lease" time but I'm not really sure it's actually a DHCP thats being handed out. When I do a show dhcpd nothing comes up. Setting each MAC address to a static IP in the range would be fine also. Just not sure how and if that can be done.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PIX 506 VPN Address-pool issue
- Thread starter judgeh59
- Start date
Similar threads
- Locked
- Question
- Locked
- Question