I have a pix 506 running 6.1 and I have put the ssh commands into the pix. When I try to ssh to the pix it asks for username - there is none set and even when I hit enter and put in the telnet or enable password it will still not work. Am I doing something wrong?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pix 506 - 6.1
- Thread starter vtgman
- Start date
Supergrrover
IS-IT--Management
The username is
pix
Brent
Systems Engineer / Consultant
CCNP, CCSP
pix
Brent
Systems Engineer / Consultant
CCNP, CCSP
- Thread starter
- #3
Supergrrover
IS-IT--Management
Telnet password.
Once you are in, then en and the enabel password.
Brent
Systems Engineer / Consultant
CCNP, CCSP
Once you are in, then en and the enabel password.
Brent
Systems Engineer / Consultant
CCNP, CCSP
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question