PIX 501 Restore

[all4it]

Currently my PIX 501 version 6.2 is working without any problems, but within the next 2 weeks I will be changing the configuration for SuddenLink IP addresses from MCI's.

I have no problem saving the configuration to my TFTP server but how do I restore the configuration to the PIX 501 from my TFTP server.

I use PDM 1.1 for my changes and PDM does have an option for command line interface under the tools option. This will allow me to test the SuddenLink changes and then revert back to the MCI configuration without reentering the configuration for MCI.

Thanks

 

[NetworkGhost]

Try

"configure net "

Also, Upgrade to 6.3(5)!

http://www.wr-mem.com