Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pix 501: problem w/ application use different in & out ports

Status
Not open for further replies.
Evermick

Evermick

MIS
Joined
Apr 12, 2005
Messages
1
Location
HK
Hello,

My company need to access a web based application on other company, and that application require inbound ports other than 80.

Since we have many users need to use this application so static NAT / PAT is not allowed.

Is there a way to configure Pix 501 to open additional ports when outbound TCP port 80 is detected?

Thanks!
 
Status
Not open for further replies.

Similar threads

DavidSigma
  • Locked
  • Question Question
CP7861 problem
Replies
0
Views
490
DavidSigma
DavidSigma
jobsp90
  • Locked
  • Question Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
512
DavetheChef
DavetheChef
BleuBell
  • Locked
  • Question Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
322
BleuBell
BleuBell
CPM86
  • Locked
  • Question Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
546
CPM86
CPM86
PThomp3344
  • Locked
  • Question Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
671
nt8d09
nt8d09

Part and Inventory Search

Sponsor

Back
Top