Hi All,
I'm looking for some advice on the best method to achieve QOS on my VPN setups. Currently I use PIX 515E's to link to my remote sites around the world and then deliver Citrix to the end users via Thin Clients. However recently the remote users have complained that the response of the thin clients has slowed, and from monitoring my central leased line it is now extremly busy with all the different traffic it has to route.
I would like to be able to allocate a fixed percentage of bandwidth to the Citrix clients to ensure their performance, and I know this is possible, I have the configs etc., however what i'm unsure of is how the router will cope with the packets it is passed from the PIX as they are encrypted.
Has anyone ever done anything like this before or could anyone offer any suggestions as to best practices.
Thanks in advance and kind regards
Jez
I'm looking for some advice on the best method to achieve QOS on my VPN setups. Currently I use PIX 515E's to link to my remote sites around the world and then deliver Citrix to the end users via Thin Clients. However recently the remote users have complained that the response of the thin clients has slowed, and from monitoring my central leased line it is now extremly busy with all the different traffic it has to route.
I would like to be able to allocate a fixed percentage of bandwidth to the Citrix clients to ensure their performance, and I know this is possible, I have the configs etc., however what i'm unsure of is how the router will cope with the packets it is passed from the PIX as they are encrypted.
Has anyone ever done anything like this before or could anyone offer any suggestions as to best practices.
Thanks in advance and kind regards
Jez