Preparing to update a CS1000E chassis with a CPMG co-res card (combo CP and MGC). Right now unable to locate the NTC326AAE6 RJ45 to serial adapter needed to access the RJ45 TTY console port. Does a regular Cisco console cable work? Unfortunately 500+ miles from the site and trying to tell a remote field tech how to set up terminal server access to the TTY.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pinout needed for CPMG TTY connection
- Thread starter curtismo
- Start date
^^ Ooops! Thats wrong! I unfortuneatly posted before engaging my brain :-(
I'll try and find the right cable!
I'll try and find the right cable!
I think this: is for the CPPM TTY ports, and this: is for the MGC in slot zero.
BUT, I've never seen a combo CP and MGC, so I'm NOT HELPING, haha. Sorry for the confusion and worthless posts 
Good luck, if you find the right cable, please let me know!
Good luck, if you find the right cable, please let me know!- Status
Similar threads
- Locked
- Question
- Locked
- Question