Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PIN our reqd for DS1 amphanol connector ro RJ-45

Status
Not open for further replies.
noidatech

noidatech

Technical User
Joined
May 15, 2006
Messages
99
Location
US
I am going to connect a DS1 card ( Amphaneol connector) to a cisco gateway with RJ-45 connector with ds1 and t1 controller configured for E1. can anyone provide the pin out reqd for the same

thanks
 
Sort by date Sort by votes
i believe its pairs 22 and 23.
 
Upvote 0 Downvote
Check page 68 of the PDF "Installing the Avaya G650 Gateway" (03-300685 is the manual version I have). This page lists the cross-connects for all board connections and is a great reference chart you should have handy all the time. Cheers...

Zarbs
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Samfiller
  • Locked
  • Question Question
Avaya Definity Platform Port Pin outs
Replies
3
Views
531
AvayaTier3
AvayaTier3
Traveler74
  • Locked
  • Question Question
Run a report to find the old 1120/1140 phones on our network
Replies
2
Views
702
Shaun E
Shaun E
Y
  • Locked
  • Question Question
Certs for SBCE
Replies
2
Views
470
Instructor of Avaya
Instructor of Avaya
bankingguy
  • Locked
  • Question Question
Egypt sample DS1 board configuration (Telecom Egypt)
Replies
1
Views
397
ZeroZeroOne
ZeroZeroOne
A
  • Locked
  • Question Question
CMC Cabinet Connections for Definity G3
Replies
5
Views
648
dialtonebone
dialtonebone

Part and Inventory Search

Sponsor

Back
Top