Phone Rings

[PhoneTeck]

I have a question concerning setting up a 6408D+ phone that just rings I dont want it to go to voicemail after like 3 rings or transfering over to are attendant like most of our phones do, im sure this is something simple to do im just not sure what I need to change exactly, we are using a G3R V6 Switch.

 

[colby007]

Add a new cover path - add cover path next - make a note of the new cover path number. Enter command - change cover path x. On that cover path screen you can set the amount of rings and where to redirect the phone to.

 

[4merAvaya]

If you don't want the phone to do enything else just remove the coverage path on page 1 of the station form.

Kevin

 

[MikeD1971]

S8700 Multi-Connect S8700-W/ G650s FIBER Administration Critical Reliability
Anybody have any docs on how to make this work?
when adding fiber I get "Configuration not allowed with more than one IP Server Interface"


Here is what i have already

add fiber-link 1 Page 1 of 1
FIBER LINK ADMINISTRATION

Fiber Link #: 1
Is one endpoint remoted via DS1 Converter Complex? no

ENDPOINT-1 ENDPOINT-2
(A-PNC) (A-PNC)
Board Location: 01a02 Board Location: 02a02
Board Type: ei Board Type: ei



ENDPOINT-1 ENDPOINT-2
(B-PNC) (B-PNC)
Board Location: 01b02 Board Location: 02b02
Board Type: ei Board Type: ei



Fiber Translation: multi-mode Converter?
Type of Transceivers: A
Configuration not allowed with more than one IP Server Interface



IP SERVER INTERFACE INFORMATION

Port Pri/ Primary/ Primary/ Primary/ State Of
Ntwk Sec Secondary Secondary Secondary Serv Control Health
Num Bd Loc IP Address Host Name DHCP ID State State C P E G
---- ------ --------------- ---------------- --------- ----- ------- -------
1 1A01 198.152.254.1 ipsi-A01a ipsi-A01a IN actv-aa 0.0.0.0
1B01 198.152.255.1 ipsi-A01b ipsi-A01b IN standby 0.0.0.0
2 2A01 198.152.254.2 ipsi-A02a ipsi-A02a IN actv-aa 0.0.0.0
2B01 198.152.255.2 ipsi-A02b ipsi-A02b IN standby 0.0.0.0


isplay system-parameters duplication
DUPLICATION RELATED SYSTEM PARAMETERS






Enable Operation of PNC Duplication? y

Enable Operation of IPSI Duplication? y

 

[orypecos]

The call to the phone will go to the Attendant after a period of time even if it doesn't have a cover path, but at least without the cover path it will take longer.


MikeD1971 u would have better luck if u start a new posting to get assistance on your problem.

Da-vi'do

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.