Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 850 error 09.037.45
- Thread starter jonbonse
- Start date
The yellow ink-melt heater is on, but ink does not seem to be dripping. Check that the ink stick is able to advance in the chute. An ink stick jam will be reported three times before an ink-melter fault is declared. Replace the ink loader. If the problem persists, replace the power supply. Later
- Status
Similar threads
- Locked
- Question
