I have a 7303 phone with three personal-co-lines and I need to have one of the lines calls transfered to a pot line from 8 to 5. I have call transfer option on this line and it works with a butt set but not when you select the line at the station. The code is 72# and 73#. Can someone tell me what (or if I can) to change to make this happen. I think the switch is not passing the tones to the Co.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Per-Co-Lines on system 75 G3V3
- Thread starter rvw
- Start date
I think the 73xx phone is the issue. This is a hybrid set - part analog/part digital. Although the talk path is analog, the signaling part is digital. I don't think that you are sending DTMF signals to the LEC. Best solution would be to change the set to a 74xx or 84xx set.
Kevin
Kevin
zildjain15
MIS
rvw,
Were you able to forward your pcol after you changed the set type? I have a similar situation. The user would like to forward the pcol to an outside number but gets waived off when trying to accomplish this from the bridged-appr for the pcol.
thanks
vic
Were you able to forward your pcol after you changed the set type? I have a similar situation. The user would like to forward the pcol to an outside number but gets waived off when trying to accomplish this from the bridged-appr for the pcol.
thanks
vic
- Status
Similar threads
