Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Per button ring control question 1
- Thread starter papagigo1
- Start date
-
1
- #2
Check your system parameters:
change system-parameters features
Look for the setting of:
Auto Abbreviated/Delayed Transition Interval (rings):
This is the number of rings that will happen before the phone switches to silent (abbreviated) and/or the ring cycles the phone will wait before it starts to ring (delayed).
If it's zero, neither will work.
Carpe dialem! (Seize the line!)
change system-parameters features
Look for the setting of:
Auto Abbreviated/Delayed Transition Interval (rings):
This is the number of rings that will happen before the phone switches to silent (abbreviated) and/or the ring cycles the phone will wait before it starts to ring (delayed).
If it's zero, neither will work.
Carpe dialem! (Seize the line!)
Oh, and you have to set the Auto A/D to 
es.
If you choose no, then the user has to force the ringing or the delay manually by pressing an 'abrv-ring' button on their phone when they want the delay or the abbreviated ring to kick in.
Carpe dialem! (Seize the line!)
es. If you choose no, then the user has to force the ringing or the delay manually by pressing an 'abrv-ring' button on their phone when they want the delay or the abbreviated ring to kick in.
Carpe dialem! (Seize the line!)
- Thread starter
- #4
- Thread starter
- #6
Works great now!- Status
Similar threads
- Locked
- Question