Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PCA
- Thread starter marcuspb
- Start date
Firebird Scrambler
Systems Engineer
Yes that is about right for programming a PCA. You don't need to have "CFXA" enabled. It may be wise to set up a "SCPW" if you need to use the PCA ffc remote call forward feature & your SCR is also a unique number, Otherwise you can use the "SCPW" that assigned to your main DN.
All the best
Firebird Scrambler
Meridian Programmer in the UK
All the best
Firebird Scrambler
Meridian Programmer in the UK
NortelGuy1979
Programmer
Hi All,
I'm trying to work on PCA, and I get the following error message when i try and create my PCA TN, at the last prompt after I hit enter:
=============
SCH1463
PCA ISM exhausted / insufficient
Severity: Minor
=============
I have PCA pkg 398; but my LD11 header says:
=============
MEM AVAIL: (U/P): 22957985 USED U P: 5033744 565579 TOT: 28557308
DISK SPACE NEEDED: 968 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
DIGITAL TELEPHONES AVAIL: 1271 USED: 665 TOT: 1936
INTERNET TELEPHONES AVAIL: 0 USED: 0 TOT: 0
ACD AGENTS AVAIL: 17 USED: 63 TOT: 80
PCA AVAIL: 0 USED: 0 TOT: 0
AST AVAIL: 20 USED: 0 TOT: 20
TNS AVAIL: 28858 USED: 3902 TOT: 32760
DATA PORTS AVAIL: 32760 USED: 0 TOT: 32760
=============
Let me guess - do I have to buy ISMs for this feature as well as the package? TIA! -Matt
Matt H.
TMC - KCMO, USA
I'm trying to work on PCA, and I get the following error message when i try and create my PCA TN, at the last prompt after I hit enter:
=============
SCH1463
PCA ISM exhausted / insufficient
Severity: Minor
=============
I have PCA pkg 398; but my LD11 header says:
=============
MEM AVAIL: (U/P): 22957985 USED U P: 5033744 565579 TOT: 28557308
DISK SPACE NEEDED: 968 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
DIGITAL TELEPHONES AVAIL: 1271 USED: 665 TOT: 1936
INTERNET TELEPHONES AVAIL: 0 USED: 0 TOT: 0
ACD AGENTS AVAIL: 17 USED: 63 TOT: 80
PCA AVAIL: 0 USED: 0 TOT: 0
AST AVAIL: 20 USED: 0 TOT: 20
TNS AVAIL: 28858 USED: 3902 TOT: 32760
DATA PORTS AVAIL: 32760 USED: 0 TOT: 32760
=============
Let me guess - do I have to buy ISMs for this feature as well as the package? TIA! -Matt
Matt H.
TMC - KCMO, USA
Firebird Scrambler
Systems Engineer
Yes you will need revised keycodes to give you the required number of PCA units. Go to LD 22 & KEY IN "ISM".
Look at the bottom for the "PCA" used & available parameters.
All the best
Firebird Scrambler
Meridian Programmer in the UK
Look at the bottom for the "PCA" used & available parameters.
All the best
Firebird Scrambler
Meridian Programmer in the UK
NortelGuy1979
Programmer
Hmm. Found it by printing SLT; ISM gave me error. Anyway, PCA was 0/0/0. Any ideas how much something might cost like that? We're on S3.0 Tks! -M
Matt H.
TMC - KCMO, USA
Matt H.
TMC - KCMO, USA
NortelGuy1979
Programmer
PCA = Personal Call Attendant. It lets you give out 1 DN and when called, it will ring multiple DNs (or even external numbers over supervised trunks) and connects the call to whatever station answers first. Has some other features too. New in S3.0. -Matt
Matt H.
TMC - KCMO, USA
Matt H.
TMC - KCMO, USA
thanks for that, have you looked into group call, not exactly the same, close, a mcr on key 2 calls all stations with the mcr key and connects to the 1st answering station, don't think you can include a remote number, even with cfxa. cost is strange, new keycodes from nortel are not cheap, then the vendor has to get their cut, plus location will cause price to vary...
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status