Password - WAN access

[CatPlus]

I can locally telenet into my CISCO PIX using password 'password' but if I telent from WAN to my public IP address, I am prompted for my password where I enter 'password' but login fails.

Is there a different password connecting from LAN and WAN?

What and how do I change locally in order that I can connect from WAN. Is there a different user name associated with the password from WAN (e.g. admin)

Thanks
Mickey

 

[boymarty24]

You cant telnet to the outside interface, pix doesnt allow that. you need to use ipsec to access the pix from the outside. You can use ssh to connect to your outside interface. I recommend you use ssh instead of telnet at all times, even when you are at your local lan.

Do this

Define a hostname and domain-name then generate the key

hostname PIX
domain-name cisco.com
ca generate rsa key 1024
ca save all

Then setup access control

ssh XXXX YYYY outside
ssh XXXX YYYY inside

 

[CatPlus]

Thanks Boymarty24

Appreciate your response... which SSH client do you recommend I use?

Thanks
Mickey

 

[boymarty24]

I use putty. Freeware and works fine =)

 

[151569]

Hi
I need aid! I have server of web that he is in my net dmz must have access my server of data base (MS-SQL 2000) that he is inside of my internal net, already I made some attempts and none successfully.

Thank.s

 

[boymarty24]

Hi,

start a new thread and post your pix config so we can help you =)

 

[CatPlus]

Thanks boymarty24!

Appreciate your input... have a nice weekend

Mickey