shontishar
IS-IT--Management
I have just taken over this post and was not left the password to access the pix, do you know how i can reset the password to the default.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Password Recovery
- Thread starter shontishar
- Start date
- Status
dopehead
MIS
- Feb 20, 2003
- 467
You need to get a hold of the pix password recovery file from cisco.com for your version of PIX OS. Then you need to reboot and break the pix in its bootup sequence from the console and then tftp that file over, it will then ask you if you wish to reset the passwords. Then you can set a new one.
Jan
Network Systems Engineer
CCNA/CQS/CCSP/Infosec
Jan
Network Systems Engineer
CCNA/CQS/CCSP/Infosec
- Status
Similar threads
- Locked
- News