passowrd protect or hide macro code

[smiler44]

is it possible to password protect the code for an attachamate macro as I dont want people messing it up. even better, can I hide the code while still allowing them to run the macro?

Thanks smiler44

 

[remy988]

you never replied back on this post

http://www.tek-tips.com/viewthread.cfm?qid=1703522

 

[smiler44]

remy988,
Very sorry. i have gone back to my previous post and replied. If you are able to help with this post I would appreciate it
smiler 44

 

[remy988]

From the HELP files:
To set macro properties and security access
1 From the Macro Editor File menu, choose Properties.
2 Supply the necessary information in the General page.
3 Choose the Security tab to display the Security page.
4 Choose the appropriate security option and provide a password, if necessary.

© 1996 - 2004, Attachmate Corporation. All rights reserved.

this is the best that attachmate has to offer.

 

[smiler44]

right, it may be getting on for 11pm but i'm off to boot up the pc and try this as well as the date info you gave me.

thank you remy988

smiler44

 

[smiler44]

remy988, worked perfectly, thank you
smiler44