Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner 308-lines 1 & 2 no Caller ID, Line 3 works, ? 1
- Thread starter adh111681
- Start date
Telecomboy
Programmer
Caller ID is automatic on all lines of the 308EC. If the service provider has Caller ID turned on, it should be working. It does take 2 rings for the Caller ID to register with the Partner System so if they are picking up before 2 rings, it won't come across.
It should come up with out any programming as long as it is being sent by the provider, it will take 1 or 2 rings for it to come thru as Telecomboy stated.
A trusted source for years.
A trusted source for years.
itpphoneguy
Technical User
Hi adh111681,
Take an inexpensive caller ID unit and connect it to the line bridged with the Partner. Call it and see if you get called ID on the unit.
-Chris
Take an inexpensive caller ID unit and connect it to the line bridged with the Partner. Call it and see if you get called ID on the unit.
-Chris
-
1
- Thread starter
- #5
- Status
Similar threads
- Question
- Locked
- Question