Partition limits

[chrisp909]

I am changing the C: partion size on a NT workstation the user has it at 95% of capasity and is experiencing shut down problems (among other porblems)that I believe stem from this issue.

I am using partitionMagic to resize the partion from 2GB's to 4GB's I have plenty of empty space on the D: partion.

My question is this:
Is there a size limit on the partition NT is installed on? The PartionMagic user guide mentions a 2 Gig Max, but I know that's B.S., I always make the C: partion 4 gigs when I install NT server or Workstation. I am being cautious because there is critical info on the users computer and the issue isn't causing system errors that prevent productivity.

Any info would be appriciated

 

[epohl]

Chris,

The actual limit for the boot partition is 7.8gb, but NT will only allow 4gb during a standard install. But 4 is probably the safe choice if you have concerns. Also if the information is that vital I would definitely make a backup before using partition magic.

 

[MasterRacker]

NT can only deal with a 7.8GB boot partition if it is at SP4 or higher. Also, with only a 2 GB partition, it sounds like this is an older system. In the early days it was customary to set up the system partition as FAT. FAT has a limit of 2.1GB. If this is the case, you will need to convert the partition to NTFS before resizing.
Jeff
I haven't lost my mind - I know it's backed up on tape somewhere ....