quazimotto
Programmer
Greetings All! Is it possible to set-up a paging group on a CME v 12.4? IF it can be done; how would I do it?
Thanks\Quaz
Thanks\Quaz
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Paging Group???
- Thread starter quazimotto
- Start date
- Status
Via command line you need to setup an ephone-dn
example:
ephone-dn 1
number 4001
name page zone 1
paging ip 239.1.1.1 port 2000
Now you will need to apply the paging ephone-dn to an ephone
example:
ephone 9
paging-dn 1
To setup several paging groups just add more ephone-dn and apply to the correct ephone....
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
Go Army!
Tek-TIP Member 19,650
example:
ephone-dn 1
number 4001
name page zone 1
paging ip 239.1.1.1 port 2000
Now you will need to apply the paging ephone-dn to an ephone
example:
ephone 9
paging-dn 1
To setup several paging groups just add more ephone-dn and apply to the correct ephone....
Go Army!Tek-TIP Member 19,650
- Thread starter
- #3
quazimotto
Programmer
Thanks, Jeter. I appreciate the good information.
- Status
Similar threads