Ever since upgrading an Option 11 to a CS1000e I have been having trouble getting a page to come across a tie trunk attached to a BCM50 rel.1 via a point to point T-1. It worked before the upgrade so I am thinking it's on the CS1000 end. I have the paging trunk configured as a pag trunk, even tried building a ACD dn and ncfw to acod of page trunk and tried changing the type of trunks to WAT, still no luck. I get a reorder no matter what I try. Calls from and to the BCM50 to an extension work fine, just can't page from BCM to main site. The patches were updated in December, so I am going to load the latest ones next week. Thought I would post this to see if anyone had any more suggestion. Thanks in advance for any help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Paging across tie trunk
- Thread starter texan01
- Start date
Similar threads
- Locked
- Question
- Locked
- Question