adamsoderqvist
Programmer
My "pagefile.sys" is getting larger... what to do? - Since I'm convinced it's slowing down the performance!)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pagefile.sys
- Thread starter adamsoderqvist
- Start date
- Status
NT dynamically sets page file size, increasing or decreasing it as required by the system. If you want a small performance boost you can set it to a static size by right-clicking My Computer and selecting Properties>Performance>Virtual Memory. Set the minimum and maximum size the same (1.5 X System RAM is a good starting point) and then reboot. If your machine has more than one physical hard drive moving the page file to the drive other than the one holding the system files will also boost performance a tad, but remember, if you completely remove the page file from the system drive you will lose the ability to create a crashdump file in the event of a BSOD.
- Status
Similar threads
- Locked
- Question