OWA Access!

[swoodsmcse]

I am trying to connect to my exchange server through Outlook Web Access over the internet. Do i need to open any ports on my firewall besides port 80? Thanks.

 

[Xybertron]

I said port 80 was blocked in the second post...

Thus to test help.gif which does exist as he tested internally. If it doesn't work externally and he can ping and it goes to Exchange then it IS blocked. That is it...

I don't see the point of taking the thread any further as we have pointed out the problem a long time ago. Dan
Microsoft Exchange Support @ Microsoft

 

[swoodsmcse]

I am the opne managing the Cisco router so i have full access to it.
If i do Show run on my router here is the setting:
IP nat inside source static tcp 10.10.10.3 25 interface ethernet1 25
IP nat inside source static tcp 10.10.10.3 110 interface ethernet1 110
IP nat inside source static tcp 10.10.10.3 80 interface ethernet1 80
The private IP of the exchange is 10.10.10.3 so i think it is configured right.

 

[SteveTheGeek]

swoodsim: I'd recommend taking this issue to a Cisco forum, as you're probably not going to get very good Cisco help in an Exchange2000 forum.
-Steve

 

[swoodsmcse]

Thanks For all the pointers.