New2Nortel
Technical User
I have a remote site on an option 11C. Caller ID from any set at that location only displays area code and prefix. Is there a setting in the switch that sends the DN of the set calling?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Outbound Caller ID 1
- Thread starter New2Nortel
- Start date
- Status
-
1
- #2
Yes, there is. It is a few steps, but this is a really easy and pretty short guide:
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
- Thread starter
- #3
New2Nortel
Technical User
Thank you. Turns out all the settings were correct but I had to build a new table anyway.
- Status
Similar threads
