mikerose74
Programmer
thread798-1677020
Was anyone able to resolve this issue?
Was anyone able to resolve this issue?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Option 11c to IP Office QSIG trunks lock up showing idle.
- Thread starter mikerose74
- Start date
- Status
LittleMaster
Technical User
Print Loop timer in LD 73 and check for the prompt MFF , wether it is AFF or CRC ?
- Thread starter
- #3
mikerose74
Programmer
I was told that the PRI cannot do CRC only PRI2 (E1)...I am not a Nortel but i will get that answer today?
Can you explain the difference? I know the Avaya IP Office on the other side has CRC turned on.
Can you explain the difference? I know the Avaya IP Office on the other side has CRC turned on.
LittleMaster
Technical User
Yes .. definitely ..CRC is for PRI2. I have never used PRI ,,,not sure what can be the choices for TMDI..
- Status
Similar threads
- Locked
- Question
- Locked
- Question