Option 11c SDI Cable

[A2Xprt]

I need to make a SDI break out cable (from backplane of M1 to SDI 0-1-2) to test and see if the Nortel cable is bad. Anyone have the pinouts from the 9 pin connector to the 3 different ports? I've tried searching, but came up empty handed (maybe bad search words). If anone has this, can they post it here, or maybe in the FAQs?

Thanks.

 

[johnpoole]

that would be good pin outs to have, but i've never seen it printed and i've never had one bad

john poole
bellsouth business
columbia,sc

 

[pcat200]

I have replaced many a card due to the SDI port not working, but never a cable. I have never seen the pinouts printed either.

 

[tnphoneman]

I have replaced a couple of cables. Always the trouble was on port 0

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[pronei]

If you have a known working cable, just check continuity. That will give you your pinouts to duplicate. However, you know exactly what pin does what, you'll have a poor mans pinout.