Option 11 Call Hunting?

[dhnl]

Incoming DID calls for 555-2000 currently ring to DN 500 This line appears 4 times with SCR 500, 501, 502 and 503.

I would like the calls to ring at this set 3 times, then transfer to three other sets, ring 3 times then end up at a meridian mail menu.

What is the best practice to configure this?

Thanks

 

[cscsupport]

What kind of system is this that you are talking about

 

[TAnselm]

FNA on the first phone to the second phone
FNA on second phone to the third phone
FNA on the third phone to the fourth phone
FNA on the fourth phone to voicemail...

 

[dhnl]

The system is an option 11. I tried HUNT from first to second, then second to voicemail but it does not follow the second hunt to voicemail?

 

[johnpoole]

hunt is just for busy, cls fna fdn xxxx to voice mail allows forward no answer.. the did 2000 rings dn 500? is that a did or a cot?

john poole
bellsouth business
columbia,sc

 

[dhnl]

CLS FNA is enabled, FDN is set to the voicemail DN (255)

Calls FNA from first phone to second phone, but second phone to voicemail does not work - it just continues to ring.

Is there anything else I can look at? This is the second set:

DES 204
TN 002 0 00 10
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 255
TGAR 15
LDN NO
NCOS 6
SGRP 0
RNPG 2
SCI 0
SSU
LNRS 24
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG3
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
CPFD CPTD ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT 255
LHK 12
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 225 0 MARP
01 TRN
02 SCR 325 0 MARP
03 MWK 255
04 CFW 4 204
05 AO6
06
07
08 SCR 550 0
09 SCR 551 0 MARP
10 SCR 552 0 MARP
11 SCR 553 0
12 ADL 20
13 ADL 20
14 ADL 20
15
DATE 13 NOV 2007

 

[pacojonezl40]

Change CLS to SFA (Second level forwarding allowed)

 

[pacojonezl40]

Also, ypu will need to change the MARP to all the same TN