opt 61 rls 16 call id issue

[Trason]

I have a Opt61c running:
VERSION 1811
RELEASE 19
ISSUE 46

it is connected to a CS1000 running:
RELEASE 5
ISSUE 50 J +

they are connected with 2 T1's with cdp's. All DID calls come into the cs1000 and get routed to the opt61. The cs1000 has all the PRI's. when the opt61 needs to make a call out to the world it goes cdp over the t1 to the cs1000 and out a PRI.

well there is no option to program caller id (CLID) after the dn on the opt 61.

DES DATACL
TN 004 0 02 00
TYPE 500
CDEN 4D
CUST 0
DN 7267
CPND
NAME Zach McCaskill
XPLN 14
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 0
LDN NO
NCOS 5
RNPG 0
LNRS 16
XLST
SCI 0
CLS UNR DTN FBD XFA WTA THFD FND HTD ONP
LPR XRA CWD SWD MWD LPD XHD CCSD LNA TVD
CFTD SFD C6D PDN CNID AUTU
ICDD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
USRD
DATE 29 APR 2013


so what has been reported to me is that people outside the system are getting a call id of 7267. and nothing else. Is there anything i can do to change this? Or just send a default call id for everyone at the 61's location? But at the same time keep the names display between the 2 pbx's

 

[Trason]

oops i labeled the tread wrong. how can i edit it? its rls 19 not 16. cant find the edit button anywhere

 

[KCFLHRC]

You say T-1's but are they actually PRI's? I'm assuming so. What do you have in your RCAP settings on the d-chanel?

 

[jamie2]

You are missing a CLID identifier after your DN 7267 X. Try putting in the CLID table identifier and see if that helps and report back.

 

[Trason]

yea they are PRI's sorry.
RCAP ND2 MSDL

I can not enter a CLID. I don't think it was around in Rls 19. or I don't have the package. When I type DN 7223 and "space" I get MARP repeating to scroll until ****:
REQ: new
TYPE: 500
TN 4 1 14 14
DES test
CUST 0
DIG
DN 7223 MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP
MARP



as far as the route:


TN 002 23
TYPE TIE
CUST 0
NCOS 0
RTMB 3 23
B-CHANNEL SIGNALING
TGAR 0
CLS UNR DTN WTA LPR APN THFD
P10 VNL
DATE 6 DEC 1994



TYPE RDB
CUST 00
ROUT 3
TKTP TIE
CNVT NO
ESN NO
SAT NO
RCLS EXT
DTRK YES
ISDN YES
MODE PRA
PNI 00001
IFC SL1
NCNA YES
NCRD YES
TRO NO
CHTY BCH
CTYP UKWN
INAC YES
ISAR NO
TGAR 0
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH RRB
STEP
ACOD 4997
TARG 01 03 05
OABS
INST
ANTK
SIGO ESN5
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
NBS 2048
NBL 4096
NRAG 30
TFD 0
DRNG NO
CDR NO
MUS NO
OHQ NO
OHQT 00
CBQ YES
AUTH NO


ADAN DCH 0
CTYP MSDL
DNUM 6
PORT 0
DES TONWTH
USR PRI
DCHL 2
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC SL1
SIDE USR
RLS ID 19
RCAP ND2 MSDL
T200 3
T203 10
N200 3
N201 260
K 7

 

[KCFLHRC]

Can you turn on CLID in LD 15? I don't remember if it was around in Rls. 19 either.

 

[Trason]

when i try to print it out i get errors.
>ld 21
PT1000
REQ prt
TYPE clid
SCH0111
TYPE !
>err sch111

SCH0111
You have entered an invalid response for that prompt. The system is
unable to match the field input with the stored mnemonics.

Also LD 15 did not start the gate opener till Rls21. So i am having trouble even trying to see if i can turn it on. This is why i need Rlse19 books

here is my cdb:
TYPE CDB
CUST 00
DLDN YES
LDA0 ALL
LDA1
LDA2
LDA3
DGRP 20
IRNG NO
PKND 1
NIT1
TIM1
NIT2
TIM2
NIT3
TIM3
NIT4
TIM4
SPRE 2
ATDN 3599
NCOS 7
CAS N
OPT LOD CTA IC1 SYA
XTG IDP XLF CFF
MCI ROX CPA IHD
DSX LRA HTU DNX
COX XBL SBD DBA
RTR RTA HVA CFRA
ACCD OVF OVF OVF ATN
CTVN OVF OVF OVF ATN
MBNR OVF OVF OVF ATN
CTRC OVF NAP OVF NAP
CLDN NAP OVF NAP NAP
NINV OVF OVF OVF ATN
NITR OVF OVF OVF ATN
NRES OVF OVF OVF ATN
NBLK OVF OVF OVF ATN
ANAT 1111
ANLD 111
AATT
RTIM 30 30 30
ATIM 0
ICI 00
ICI 01
ICI 02
ICI 03
ICI 04
ICI 05
ICI 06
ICI 07
ICI 08
ICI 09
IMS NO
FLSH 75
CHLN 0
PREO 0
FCAF NO
FNAD FDN
FNAT FDN
FNAL FDN
CFN0 3
CFN1 4


PAGE 002

CFN2 5
CFTA YES
DFN0 3
DFN1 3
DFN2 3
PHDT 30
SRCD 0000
ATAC NONE
CWUP YES
CWCL 0 2
CWTM 4 14
CWBZ YES YES
DNDT BST
CCRS UNR
ECC1 UNR
ECC2 UNR
MDID NO
NDID NO
MWFB NO
MATT NO
SPVC 00
MUS NO
CONG OVFL
LLT OVF
ODN0
ODN1
ODN2
ODN3
ODN4
ODN5
ODN6
ODN7
ODN8
ODN9
ASTM 30
DIND 30
DIDT 14
LDTT 6
BOTO 14
DBRC 60
IDCA NO
DCMX 0
EEST NO
SCPL 0
VSID

GP02
GP03
GP04
GP05
GP06
GP07
GP08
GP09
GP10
GP11
GP12
GP13
GP14
GP15
AC2
ISDN YES


PAGE 003

PNI 1

HNPA
HNXX
HLOC
LSC
CNTP PDN
RCNT 5


I don't think Rls19 has it. I am assuming CLID is part of CLASS: Calling Number and Name Delivery, which an old Rls23 book says was "Introduced in X11 Release:23

 

[Trason]

Is there a way send the name and dn between the 2 pbx's but not send any info out the PRI? I think that would be better than sending the 4 digits of the DN out over the PRI.