Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Opt 11C rls24 does it support NI2?
- Thread starter djs01
- Start date
- Thread starter
- #3
Ok I will check that.
Now for the programming, I know how to program the dch for NI2, but how about the routes?
I have programmed ISA routes and incoming and outgoing routes for pri, is it the same for NI2? Seems when I tried to add new trunks to my existing route(DMS interface or NI1), it gave me an error indicating that that route would not support NI2 trunks.
So if you could give me the short version of how to program incoming and outgoing routes for the NI2 that would be great.
Thanks in advance,
Dave
Now for the programming, I know how to program the dch for NI2, but how about the routes?
I have programmed ISA routes and incoming and outgoing routes for pri, is it the same for NI2? Seems when I tried to add new trunks to my existing route(DMS interface or NI1), it gave me an error indicating that that route would not support NI2 trunks.
So if you could give me the short version of how to program incoming and outgoing routes for the NI2 that would be great.
Thanks in advance,
Dave
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question