Opt 11C 23.55 - System won't come back up after power failure

[shawntoronto]

I power outage of a couple of days has resulted in the system not coming back up after power up.

The power was cut off and once restored, it goes through it's regular start up routines, all card lights come on as usual, but no sets or attendant consoles work.

I see the following messages on start up.

___________________________________________________

SYS000 000400 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2355 LOADED FROM C: DATE/TIME: 24/12/2009 01:00:48 RECS: 59 SEQNO
: 3816
SYSLOAD RELEASE 23.55
SYS0641 SYSL003B20 00320A 000734 00
SYS0071 0735 FATAL

SYS4461
**PROBLEMS FOUND.**

DONE

IIINNNIII000000000 000000000000000000000000 111333 555222 555444 00000
0000000000000000000 000000000000000000000000 000000000000000000000000 0000
00000000000000000000 ??? 000000000000000000000000

DSET000 DSET000 DSET000 DOWN LOAD 0 0 0 0 0 0 0 79671 DOWN LOAD 0 0 0 0 0 0 0 79
671 DOWN LOAD 0 0 0 0 0 0 0 79671

INI003 INI003 INI003 000000B0 000000B4 000000B8 000000CE 000000B0 000000B4 00000
0B8 000000CE 000000B0 000000B4 000000B8 000000CE

>>>

XMI002 XMI002 XMI002 XFIL 1 XFIL 1 XFIL 1

XMI002 XMI002 XMI002 2 XDLC2 XDLC2 XDLC

XMI008 XMI008 XMI008 2 2 2

XMI002 XMI002 XMI002 3 XMLC3 XMLC3 XMLC

XMI008 XMI008 XMI008 3 3 3

XMI002 XMI002 XMI002 4 XDLC4 XDLC4 XDLC

XMI008 XMI008 XMI008 4 4 4

XMI002 XMI002 XMI002 5 XDLC5 XDLC5 XDLC

XMI008 XMI008 XMI008 5 5 5

XMI002 XMI002 XMI002 6 XDLC6 XDLC6 XDLC

XMI008 XMI008 XMI008 6 6 6

XMI002 XMI002 XMI002 7 XDLC7 XDLC7 XDLC

XMI008 XMI008 XMI008 7 7 7

XMI002 XMI002 XMI002 8 8 8

XMI008 XMI008 XMI008 8 8 8

SRPT750 SRPT750 SRPT750 INI 0: INI on side 0 due to System Cold StartINI 0: INI
on side 0 due to System Cold StartINI 0: INI on side 0 due to System Cold Start

SRPT752 SRPT752 SRPT752 INI 0: INI completed in 10 secondsINI 0: INI completed i
n 10 secondsINI 0: INI completed in 10 seconds

DROL000 DROL000 DROL000 DAILY ROUTINE BEGINDAILY ROUTINE BEGINDAILY ROUTINE BEGI
N

NWS LD30 BEGIN 13:53 24/12/2009 NWS LD30 BEGIN 13:53 24/12/2009 NWS
LD30 BEGIN 13:53 24/12/2009

DROL001 DROL001 DROL001 DAILY ROUTINE ENDDAILY ROUTINE ENDDAILY ROUTINE END

NWS LD30 END 13:54 24/12/2009 NWS LD30 END 13:54 24/12/2009 NWS LD30
END 13:54 24/12/2009

DROL000 DROL000 DROL000 DAILY ROUTINE BEGINDAILY ROUTINE BEGINDAILY ROUTINE BEGI
N

TDS LD34 BEGIN 13:54 24/12/2009 TDS LD34 BEGIN 13:54 24/12/2009 TDS
LD34 BEGIN 13:54 24/12/2009

DROL001 DROL001 DROL001 DAILY ROUTINE ENDDAILY ROUTINE ENDDAILY ROUTINE END

TDS LD34 END 13:54 24/12/2009 TDS LD34 END 13:54 24/12/2009 TDS LD34
END 13:54 24/12/2009

DROL000 DROL000 DROL000 DAILY ROUTINE BEGINDAILY ROUTINE BEGINDAILY ROUTINE BEGI
N

CNF LD38 BEGIN 13:54 24/12/2009 CNF LD38 BEGIN 13:54 24/12/2009 CNF
LD38 BEGIN 13:54 24/12/2009

DROL001 DROL001 DROL001 DAILY ROUTINE ENDDAILY ROUTINE ENDDAILY ROUTINE END

CNF LD38 END 13:54 24/12/2009 CNF LD38 END 13:54 24/12/2009 CNF LD38
END 13:54 24/12/2009

DROL000 DROL000 DROL000 DAILY ROUTINE BEGINDAILY ROUTINE BEGINDAILY ROUTINE BEGI
N

AUDIT LD44 BEGIN 13:54 24/12/2009 AUDIT LD44 BEGIN 13:54 24/12/2009 AUDI
T LD44 BEGIN 13:54 24/12/2009

OVL111 044 MID
_______________________________________________________

Also, I am unable to log in with the PW1 or PW2, both of which remaing as the default 1111/0000.

Thoughts?

Shawn

 

[tekice]

Do you have a good backup..probally need to reinstall s/w and then install your known good back up..if you want more info let us know...

 

[shawntoronto]

No back up. Ugh. Guess I'll have to reinstall and put in the keycodes. Merry Christmas to me. LOL

Is there a quick and easy way to do this?

I assume there's no way to back up what I currently have programmed?

Let me know... I'll be awaiting your reply as I kiss my 'spare time' goodbye!

Shawn

 

[shawntoronto]

So i throw in the software card to re-install and it says it can't find the 'module.siz' file.

So i pull out the card to check the files, inadvertentky hit the reset button, and it restarts the O/S and everything comes back up fine. Whew!

Lesson learned - back it up.

Can you point me to a FAQ which covers that?

 

[DocVic]

Back it up to a PCMCIA card and get a current 23.55 on another card using CardPro 9, just in case. You might want to invest in a crash kit with an SSC card and a daughter memory card for disaster recovery.

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[Reusser]

are you back up?

if not there most likely is a back up on the z: drive that could be recovered and loaded from.

Then just a matter of replacing software daughtercard and reloadeing software with recovered backup.

 

[Firebird Scrambler]

Please follow my faq on this at

ghtrout.com - This website is for sale! - ghtrout Resources and Information.

This website is for sale! ghtrout.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, ghtrout.com has it all. We hope you find what you are searching for!

www.ghtrout.com

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.