I have an IP406 running 3.0(69). There are 3 IP users programmed and sitting on the local lan. They can hear the callers but the callers cannot hear them. There are however 3 more IP Phones on a point to point 200 miles away that work fine. They are set up the same way in programming. Any Ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
One Way Talk Path
- Thread starter PCambas
- Start date
If yor have 4600 series IP phones. You might take a look at this.
"The lack of money is the root of all evil
"The lack of money is the root of all evil
- Thread starter
- #3
kwing112000
Vendor
You may even have the wrong IP Routes. Are the phones in the same subnet as the ipo
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
