I have a customer with MICS 6.1 T1 with PRI, they want to send a different caller ID. I have set OLI to 5555555 but the customer main number still appears on the called phone, am I missing something? does the user have to call out on a spectific line? Or does it only work between Norstar sets in the same system??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OLI Question?? 1
- Thread starter silver987
- Start date
- Thread starter
- #4
-
1
- #5
phoneguy427
Technical User
I believe under line access for that set you specify OLI, numbers only.
- Thread starter
- #6
- Thread starter
- #8
If you are talking about called ID under telco features, yes. Thanks for your input any help is appreciated..
nope - that is one place. this is another place but i just realized that shows up only in 7.0
It could be what PERRYPJ said - there is one other thing
just the terminating CO's database may not be synced up.
try calling diff companies - or try calling back into the same trunk
It could be what PERRYPJ said - there is one other thing
just the terminating CO's database may not be synced up.
try calling diff companies - or try calling back into the same trunk
- Status
