OFO problems

[Diislander]

I ran the OFO wizard, i set the minimum static volume to 10MB and the maximum to 10000MB ( the maximum ). When ever I run a job, it get the message that the static volume has grown to its maximum size. Is there any way to fix this?

 

[Xemus]

Check this link out. In NT, the max OFO file size can't be larger than 10000MB (10GB)

http://seer.support.veritas.com/docs/203260.htm

Hope this helps. MCSE, A+

 

[dogmata]

Disslander
---------

- if you are using 8.6 make sure that you do not put a path in manually to the static volume (OFO cache). Secondly, for this error, think of the initial static volume settings as being the maximum size it can grow to. The only thing you have to bear in mind for the max. is that it is NOT set below the initial size. You want to increase the initial size in increments of about 250 MB and watch the size of the OTMsnapshot.otm (the cache for OFO). 10 MB sounds way to low.

cheers