Odd ZEN imaging problem

[myersn024]

I do all of the imaging where I work and here recently the server that I keep the images on is getting kind of full. So, after talking to my boss I decided to try to store an image on a server other than the imaging server. It worked fine, but now I can't see the image file when I browse to its location. The imaging engine doesn't have any problem seeing it when I image a computer, but I can't see it to delete it since it was only a test.

Here's what I did. Our imaging server's IP is 10.1.1.38. I told it to store the image archive at the path //10.20.1.101/zen/images/test.zmg. When I use Windows Explorer to browse to the zen volume on 10.20.1.101 I can see the images folder but there's nothing there.

Any ideas?

 

[myersn024]

I'm sorry, I think I was a little vague (more clarification never hurt, right?).

the command below stored the image:
img makep 10.1.1.38 //10.20.1.101/zen/images/test.zmg

the command below will restore the image to a new drive:
img restorep 10.1.1.38 //10.20.1.101/zen/images/test.zmg

Both commands work fine, but I can't see the file when I browse the server.

 

[LawnBoy]

Odd. Is 10.20.1.101 a Netware server?

I'm gonna give this scenario a shot and see what happens.

 

[LawnBoy]

I can't seem to redirect at all. "Invalid Image path".
Probably permissions, don't have time to play with it right now, sorry.

 

[myersn024]

yes 10.20.1.101 is a netware server.