Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Octel 250

Status
Not open for further replies.

1Duncan1

Technical User
Joined
Aug 10, 2010
Messages
5
Location
CA
replaced fan/pwr unit still won't start only have a the v1 light
I have power comming out of the back at 27 VDC
 
Need more info on this one. You replaced the fan and a power unit? On a 250 they are separate units. Do you only have one in the tray?

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Hi i have found that the fuse on the inside of the back plane was blown now the flt cards wont load and i have no alarms on the system when i go into menu 4 the are no ports and i can asign them
 
syatem reads that it is uploading cards and takes 20 min before it fails
 
do you know what the dip switch on the ccf card is for i have on that has them on on and one all off?
which is the proper way
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top