I can login to a Novell server from one machine but not another. When I do a showsvcs it displays the Novell server. However when I do a nwservers no Novell servers are shown. On the machine that works nwservers displays the novell server. IPX appears to be configured and working. IP works and I can ping any machine [sig][/sig]
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NWLOGIN
- Thread starter De8o
- Start date
Nostradamus
Technical User
I wonder how this question got up in this forum, but anyway...
do you use the same account on all computers?
A friend of mine had a similar problem once, it was the network card that was broken. You should perhaps install it from scratch once again.
Is it a 4.11 Server?
Try running "trace on" in the server console to see if any contact is made with the server during login. I have an unusual short/bad memory, but I think the command is "set trace=on" or similar.
[sig]<p>Nostradamus<br><a href=mailto: > </a><br><a href= > </a><br> [/sig]
do you use the same account on all computers?
A friend of mine had a similar problem once, it was the network card that was broken. You should perhaps install it from scratch once again.
Is it a 4.11 Server?
Try running "trace on" in the server console to see if any contact is made with the server during login. I have an unusual short/bad memory, but I think the command is "set trace=on" or similar.
[sig]<p>Nostradamus<br><a href=mailto: > </a><br><a href= > </a><br> [/sig]
- Thread starter
- #3
- Status