NW 6 and ADR50

[Borderline]

jhupe,

We have a Netware 6 network running on 2 Dell 2450 servers. We just installed an ADR50 TBU with Backup Exec 9 and have had no luck getting it working. The drive is connected to a separate AH2940 board. It is recognized ob boot and by the HCT util but we can't read or write to it. BE fails to see it at all.

We'd appreciate any help.

Thanks,

Al

 

[gwootton]

Ew, netware. I hate that OS. anyway, If it's recognized on boot and you've got your scsi drivers loaded correctly, Backup Exec should see it, but you may need to apply some sort of patch to BE to get it to load the drivers and recognize the device. On the plus side, Novell supports onstream drives on their os, so you may want to contact them for help. I know Veritas charges an arm and a leg, but i don't have a netware system to test with, so i hope what i've said so far helps.

Let me know if you have any more questions.

--Greg