Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NVRAM Cartridge Rel:02 Question 7.0 Upgrade

Status
Not open for further replies.

vegasnortel

Vendor
Dec 24, 2001
117
US
Getting ready to go 5.0XC to 7.0XC. Will be using upgrade tool to go from 5.0XC to 6.1XC first, then 6.1XC to 7.0XC. Current NVRAM says NNTM48602520, 2001/03/08, NTBB08GA-93, REL:02, 2003-09

Just verifying that this NVRAM cartridge is correct so I won't lose PRI codes to a system ID change. I will back up as always, just triple checking befor next weeks upgrade.

Thanks!

Rich
702-325-5805
 
Oh, one more thing.....Call Pilot 150 is 1.5.32.01 software version. Is this going to work on 7.0XC Software or do I need to upgrade this as well?

Thanks again to all you Nortel Guru guys and gals!

Rich
702-325-5805
 
Thanks! What about the NVRAM? Am I good to go on this?

Rich
702-325-5805
 
Thanks Brian, I'll keep my fingers crossed, kill a chicken and place it on the alter of burnt offerings to the phone gods!

 
don't panic if it's not up in 10 minutes. I have seen it take up to 30 minutes before the system came up when upgrading to RLS 7.
 
I'm confused, I thought you only need the latest Upgrade Tool to jump from 5.0 to 7.0? therfore do not need 6 software?

 
I have a spare 6.1XC so I am going 5.0XC to 6.1XC then to 7.0XC From what I have read so far, this is only way to not lose system ID and PRI codes. Can anyone confirm? I was also told from my vendor that if I go this route, no upgrade tool is needed....again....anyone confirming will appreciate it!
 
I have not tested this but yes it should work.
 
You need to be at 6.1 with R2 sleeve to not need the upgrade tool.
 
Thanks to all! I upgraded the CP150 to 3.0. I'll probably upgrade the MICS this weekend. Thanks again, I'll let you know how it goes!

Rich
702-325-5805
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top