Nvidia WDM Driver "Code10 Error"...Please help!!!

[media100]

Hello,

since a few month I'm trying to get the Nvidia WDM drivers working with my Leadtek Ti4200 Vivo-card.

I found out that the WDM video capture driver starts, if no cables are connected to the Vivo ports while boot process. Another way to go is the following: install an old Detonator driver (30.72 or similar) an WDM driver 1.08 and the system will boot with cables connected, too.

My question: Has anyone fully resolved the error10 problem? ...i.e. how to boot with NEW driver versions AND connected video cables while startup? Please help!!! What's wrong with these crappy WDM-drivers????

Greetings

Christopher

 

[jbotz]

Try going direct to Leadtek and downloading their driver as opposed to the Nvidia reference driver. Theoretically, the hardware and drivers should be identical, but I've found that this isn't always the case. If you're still having problems, repost and I'll see what else I can come up with.

-J