mortgsteps
Technical User
I have a laptop with NT workstation on it. I want to put Win 95 on it instead. Is there an easy way to install Win 95 over NT. Win 95 setup will not run under NT
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
nt to win 95
- Thread starter mortgsteps
- Start date
- Status
If you are wanting to run 95 only, I would suggest you backup the user data and fdisk/format the drive and install fresh.<br><br>If you want to dual boot, the first primary partition must be FAT16. The partiton you are installing 95 on must be FAT16 or FAT32 (OSR2+). If so, you should run rdisk in NT to get a current repair disk. You should then boot up with a boot disk that enables the Cd-rom. You can install 95. Once complete you should run NT setup choosing repair and select repair boot sector(mbr). This should provide you with a menu when booting allowing you to boot either OS.<br><br><br>dxd<br>
- Status