Hello,
A few months ago one of our Novell Clients had and issue with abends at the end of restores we were recommended to upgrade the client to 5.3.4 and go to Service Pack 5 we have since upgraded both. Dispite that the other day a
server abended again at the end of a restore. Note
this does not occur with most Restores but enough
to be troublesome.
This was a GroupWise Post office restore from one
server to another. Though the other abends were
restores to the original server.
Has anyone had this happen with the latest client 5.3.4 and Netware 6.5 SP5?
Could this be a Novell Settings Tuning Issue? Where something filled up?
TSM 5.3.4
Netware 6.5 SP5
TSM Netware client 5.3.4
Thanks in advance!
(Below is a small portion of the abend log.)
Novell Netware, V6.5 Support Pack 5 - CPR Release
PVER: 6.50.05
Server DOCGW3 halted Thursday, October 26, 2006 11:09:40.020 am
Abend 1 on P01: Server-5.70.05: Page Fault Processor Exception (Error
code 00000000)
Registers:
CS = 0060 DS = 007B ES = 007B FS = 007B GS = 007B SS = 0068
EAX = 00000000 EBX = A4F7ACA0 ECX = 00000000 EDX = A47719E4
ESI = A484C2B8 EDI = A4780BD4 EBP = A4F7AC68 ESP = A4F7AC58
EIP = A3FA2A3E FLAGS = 00010246
A3FA2A3E 0FB65204 MOVZX EDX, byte ptr [EDX+04]=?
EIP in DSMC.NLM at code start +00153A3Eh
Access Location: 0xA47719E8
The violation occurred while processing the following instruction:
A3FA2A3E 0FB65204 MOVZX EDX, byte ptr [EDX+04]
A3FA2A42 885601 MOV [ESI+01], DL
A3FA2A45 C7460A01000000 MOV [ESI+0A], 00000001
A3FA2A4C 8B5710 MOV EDX, [EDI+10]
A3FA2A4F 89560E MOV [ESI+0E], EDX
A3FA2A52 8B45F0 MOV EAX, [EBP-10]
A3FA2A55 8B5024 MOV EDX, [EAX+24]
A3FA2A58 895612 MOV [ESI+12], EDX
A3FA2A5B 803D95814AA100 CMP [A14A8195]=00, 00
A3FA2A62 7407 JZ A3FA2A6B
Running process: DSMC.NLM:a3f03d20 Process
Thread Owned by NLM: DSMC.NLM
Stack pointer: A4F7AB8C
OS Stack limit: A4F6AD40
Scheduling priority: 67371008
Wait state: 3030070 Yielded CPU
A few months ago one of our Novell Clients had and issue with abends at the end of restores we were recommended to upgrade the client to 5.3.4 and go to Service Pack 5 we have since upgraded both. Dispite that the other day a
server abended again at the end of a restore. Note
this does not occur with most Restores but enough
to be troublesome.
This was a GroupWise Post office restore from one
server to another. Though the other abends were
restores to the original server.
Has anyone had this happen with the latest client 5.3.4 and Netware 6.5 SP5?
Could this be a Novell Settings Tuning Issue? Where something filled up?
TSM 5.3.4
Netware 6.5 SP5
TSM Netware client 5.3.4
Thanks in advance!
(Below is a small portion of the abend log.)
Novell Netware, V6.5 Support Pack 5 - CPR Release
PVER: 6.50.05
Server DOCGW3 halted Thursday, October 26, 2006 11:09:40.020 am
Abend 1 on P01: Server-5.70.05: Page Fault Processor Exception (Error
code 00000000)
Registers:
CS = 0060 DS = 007B ES = 007B FS = 007B GS = 007B SS = 0068
EAX = 00000000 EBX = A4F7ACA0 ECX = 00000000 EDX = A47719E4
ESI = A484C2B8 EDI = A4780BD4 EBP = A4F7AC68 ESP = A4F7AC58
EIP = A3FA2A3E FLAGS = 00010246
A3FA2A3E 0FB65204 MOVZX EDX, byte ptr [EDX+04]=?
EIP in DSMC.NLM at code start +00153A3Eh
Access Location: 0xA47719E8
The violation occurred while processing the following instruction:
A3FA2A3E 0FB65204 MOVZX EDX, byte ptr [EDX+04]
A3FA2A42 885601 MOV [ESI+01], DL
A3FA2A45 C7460A01000000 MOV [ESI+0A], 00000001
A3FA2A4C 8B5710 MOV EDX, [EDI+10]
A3FA2A4F 89560E MOV [ESI+0E], EDX
A3FA2A52 8B45F0 MOV EAX, [EBP-10]
A3FA2A55 8B5024 MOV EDX, [EAX+24]
A3FA2A58 895612 MOV [ESI+12], EDX
A3FA2A5B 803D95814AA100 CMP [A14A8195]=00, 00
A3FA2A62 7407 JZ A3FA2A6B
Running process: DSMC.NLM:a3f03d20 Process
Thread Owned by NLM: DSMC.NLM
Stack pointer: A4F7AB8C
OS Stack limit: A4F6AD40
Scheduling priority: 67371008
Wait state: 3030070 Yielded CPU