Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Novell and Linux
- Thread starter koyot20
- Start date
Hi,
1) First, you need to enable ipx protocol. Example:
ipx_configure --auto_interface=on --auto_primary=on
2) To get a list of server type:
slist
3) To mount novell you can use ncpmount command. exaple:
ncpmount -S novell_server_name /mount/point -U username -P password.
You need ipxutils and ncpfs packages. Please refer to ipx-howto for more details.
regards,
feroz
1) First, you need to enable ipx protocol. Example:
ipx_configure --auto_interface=on --auto_primary=on
2) To get a list of server type:
slist
3) To mount novell you can use ncpmount command. exaple:
ncpmount -S novell_server_name /mount/point -U username -P password.
You need ipxutils and ncpfs packages. Please refer to ipx-howto for more details.
regards,
feroz
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question