Nortel Option 11c and Cisco CCS

[jorpohl]

Hello,

I am trying to find out if it would be possible to do the following:

Connect an Option 11 to an Option 61 using Cisco CCS (clear channel). The 2 pbxs are currently connected with a channelized T1, and that is working fine. Recently I have added a fiber connection between the 2 sites, and would like to remove the T1 and use Cisco CCS.

I have had the networking guys attempt this once, and all of our channels came back with the maint. busy message, and the D-Channel never came up.

I was wondering if anyone has done this, or if anyone knows if it is even possible.

Thank you!

 

[jorpohl]

Sorry - I meant Cisco TCCS (transparent clear channel signaling)

Also please let me know if this should be in the Cisco forum instead of Nortel.