Nortel Meridian - Option 61

[olympus41]

Hello,


We need to change the IDLE_SET_DISPLAY configuration on our Option 61. The only problem is that when we go to LD 17 and enter through the PARM prompts, we never receive the option of SUPPORTED_TEXT_ONLY, we receive the NORTEL_BRAND option though. What do we need to change in order to receive the options of SUPPORTED_TEXT_ONLY and IDLE_SET_DISPLAY?


Thank you,

Olympus41

 

[bigindian65]

It should be around the 34th prompt to come up with Modify?
right under it. Can you check again.

 

[olympus41]

Bigindian65,


Here is the screenshot of LD 22, TYPE: PARM.


PARM
LPIB 1000
HPIB 1000
500B 1000
SL1B 250
NCR 5000
MGCR 25
CSQI 255
CSQO 255
TUBO NO
CFWS YES
PCML MU
ALRM NO
ERRM ERR XBUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO
CLID YES
DUR5 NO
MLDN YES
MARP YES
FRPT NEFR
DCUS 1
MSCL 500
PMSI
MANU PMS1
PMCR 0
PORT NONE
NDIS 20
OCAC NO
SBA_ADM_INS 000
SBA_USER 512
BCAP SPEECH
NORTEL_BRAND NO


Thanks,

Olympus41

 

[bigindian65]

I think you need to answer yes to Nortel_Brand
then chg it from there. I am guessing, as on my parm Idle_Set_Display comes up and Nortel_Brand does not if I'm prting cfn in 22.

 

[djwht]

you can only change the idle display text if your license has BRAND = 2 on your keycode. prt your slt and look at the BRAND line

 

[bigindian65]

I do not see EBLN ISM come up in SLT, but Idle_Set_Display does, look for Idle_Set_Display in the SLT print.

 

[bigindian65]

It is in ld 143

KSHO REC


Will show Brand Index in the current keycodes.