dowsley154
IS-IT--Management
I would like to know if you remove the 9 from the dial-plan and you dial an extension on the nortel system would it dial out a pri if it can't find an extension locally?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel MCIS
- Thread starter dowsley154
- Start date
- Status
curlycord
Programmer
if you dial an extension then the extenion will ring, if no ext then "Not in service".
You sure your asking the right question?
=----(((((((((()----=
curlycord
You sure your asking the right question?
=----(((((((((()----=
curlycord
- Thread starter
- #3
dowsley154
IS-IT--Management
Curlycord,
It may not be the right question. We are looking at implementing an IP PBX in conjunction with our Nortel. What we would like to to do is have 4 digit dialing from the Nortel the IP PBX. We would like to be able to move the extensions from the Nortel to the IP PBX keeping the same extensions. I haven't been able to that at this time. If you have any thoughts I would appreciate them.
It may not be the right question. We are looking at implementing an IP PBX in conjunction with our Nortel. What we would like to to do is have 4 digit dialing from the Nortel the IP PBX. We would like to be able to move the extensions from the Nortel to the IP PBX keeping the same extensions. I haven't been able to that at this time. If you have any thoughts I would appreciate them.
curlycord
Programmer
What we would like to to do is have 4 digit dialing from the Nortel the IP PBX"
Possible via E&M cards or PRI
"We would like to be able to move the extensions from the Nortel to the IP PBX keeping the same extensions."
Each system must have there own range.
example: Norstar has exts 2XXX means the other system must have 3XXX or 4XXX or 5XXX etc.
Somebody can chime in with more ideas/info or if I am reading wrong....which has been the case this week.
=----(((((((((()----=
curlycord
Possible via E&M cards or PRI
"We would like to be able to move the extensions from the Nortel to the IP PBX keeping the same extensions."
Each system must have there own range.
example: Norstar has exts 2XXX means the other system must have 3XXX or 4XXX or 5XXX etc.
Somebody can chime in with more ideas/info or if I am reading wrong....which has been the case this week.
=----(((((((((()----=
curlycord
- Thread starter
- #5
dowsley154
IS-IT--Management
Curly,
That is what I thought but I wanted to be sure thanks for the input.
That is what I thought but I wanted to be sure thanks for the input.
- Status
Similar threads