Nortel IPphone via Cisco switch

[ciscomeo]

Hi all,

Problem: Unable to run both voice and data in the Nortel IP Phone. Its either voice works or the data port works, but not both.

Setup: The nortel ip phone is connected to a cisco switch 3750 on port: ge1/0/10 with the following config in 3750

enabled mls qos

interface ge1/0/10
switchport access vlan 10
switchport voice vlan 80
mls qos trust cos

What can I do to make both things work? I hope someone can help me.

Thank you,

Max

 

[ADB100]

You have to configure DHCP to pass the Voice VLAN information to the IP Phone.

If you would have searched on here first you wouldn't have had to post....

http://www.tek-tips.com/viewthread.cfm?qid=1323930

Andy