Nortel Contivity and Routing Problem

[stevedeb]

Hi All,

I have been playing with a loaned 600 and setting it up was a piece of cake except for a routing problem.

Here's the setup:

Contivity 600 (10.10.0.252-Management IP, 10.10.0.253-NIC),PPTP Windows default client, RADIUS authentucation to IAS, address assigned from pool in Contivity (10.10.51.x, Client-Address-Redistribution set to Static Aggregation. Static private route for all traffic to 10.10.0.135 (router).

Here's what works:

Authenticates and gives access to anything on 10.10.0.x LAN with no problems.

Here's the problem:

I can't ping anything routed off of the 10.10.0.x LAN including Internet.

Here's what's interesting:

If I add a route to my windows XP client - route add 0.0.0.0 mask 0.0.0.0 10.10.0.135 - everything works. So I obviously have a routing issue.

PPTP client is assigned its own address for gateway. This is not a problem with my other VPN setup.

I have used VPN before with another product and routing was never an issue.

What am i doing wrong??? Any ideas???