Nortel CAP (central answering position)

[loydnomsg]

Anybody have a installers manual for this...does anybody know the voltage for the power supply?

 

[techtel]

IT IS A 24VDC .25A OUTPUT
PART# NT8B60CA

 

[jerryreeve]

The CAP is polarity sensitive, wire negative 24v to the yellow (and blue if you are using 2 BLF's on the one phone) and the positivbe 24V to the black (and White) leads.

If you are thinking of using a SAPS for long loop then you only have to wire the Black/Yellow leads. again polarity sensitive.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 

[loydnomsg]

Does the CAP use 4 wires (2 Pr.) the last two of which are for the power. Positve then negative on the W/O and O/W pair?

 

[bkrike]

The DN pair goes on the inside (wh/bl)
the power goes to the next out (wh/or)
When I have set them up, polarity has not been an issue.

 

[bkrike]

woops- just read Jerrys post-
apparently I have been lucky.
Please see his post above for polarity issues

 

[loydnomsg]

Thanks

 

[TRONIC1]

I don't know if this is what your looking for but have a look.

http://www.jandjcommunications.com/Quick_Reference_Guides/norstar/Norstar_KLM_Installation.pdf

 

[loydnomsg]

This is sooo excellent...Thanks Tronic1