Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NORSTAR Polycom
- Thread starter bunkertel
- Start date
curlycord
Programmer
Wiring pinout for what?
It uses the same station pair as any other norstar set.
=----(((((((((()----=
curlycord
Toronto Canada
It uses the same station pair as any other norstar set.
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #3
I am trying to figure out the pinout for the RJ45 on the bottom of the ACU. It is a fully populated RJ45, but I am assuming only 4 terminals are in use, 2 for the TCM loop and 2 for power. Any idea which are which?
I have an ACU, but no PS, I want to see if I can make work it work without the Polycom PS.
Thanks.
I have an ACU, but no PS, I want to see if I can make work it work without the Polycom PS.
Thanks.
allworxguy
Vendor
The PS is also an ATA.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Status
Similar threads
- Locked
- Question